Our range of electric transfer cart is designed to meet the needs of many industries such as steel, non-ferrous metals, aluminum, automotive, stamping, heavy manufacturing, etc. These transfer vehicles can operate on the ground or on rails and are used to transport heavy materials in areas that cannot be covered by crane spans or bridge cranes.

All electric transfer cart is equipped with advanced safety devices, including safety lights, horns, bumpers, emergency stop buttons and mushroom-shaped emergency stop buttons. Our transfer vehicles are equipped with semi-automatic and fully automatic control systems and are equipped with a variety of fully automatic safety control devices.

Below we will introduce the precautions and usage of its electric transfer cart. Let’s learn about it with me and use it to make efficiency for your material handling.

Attention to the use of electric transfer cart

1. The size and nature of the torque to be transmitted and the requirements for vibration damping function. Gear coupling can be used for high-power heavy-duty transmission, and tire type coupling can be used for transmission with severe impact load or requiring shaft system to change vibration.

2. If the trigger switch of trackless flat material transfer car can not travel, it should be stopped immediately and checked to avoid burning the motor or causing other incidents.

3. If the trackless die transfer cart changes the direction of travel, it is necessary to wait until the trolley is completely stopped before reverse driving.

4. Often check the operation of each part of the trackless material handing transfer car. If the temperature of the motor and bearing rises or abnormal sound is found, the car should be parked immediately for inspection.

5. The working speed of the coupling of trackless flat car and the magnitude of centrifugal force caused by it. For high-speed transmission shaft, the coupling with high balance precision should be selected.

Remarkable factory show

Precautions for operators of electric transfer cart

Before using electric transfer cart, we need to pay attention to the importance of personnel training.

The person in charge and the operator shall abide by the following safety rules:

1. Let the operators be familiar with the functions of the electric transfer cart and operate it skillfully.

2. Daily inspection, accident prevention inspection: improve safety production awareness.

3. Some maintenance items of electric transfer cart. Operators can deal with simple faults and improve production efficiency.

Managers must make drivers abide by the safety rules and operation rules.

Drivers must also be familiar with

1. Accessories attached to electric transfer cart;

2. Special parts of electric transfer cart, such as accelerator pedal, brake pedal, direction switch, lifting switch and other common functions.

3. Special situation and emergency handling operation.

The driving and operating personnel of electric flatbed vehicle must continuously carry out the no-load driving, control and steering operation practice until they master it.

According to all the requirements of accident prevention regulations, the electric transfer cart must be assessed at least once a year by trained personnel, including body, vision, etc., and only when it meets the assessment standards can it work safely.

Let's Learn To Use The Electric Transport Vehicle

Remarkable teaches you how to operate the railcar safely

The safe operation procedures of R intelligent rail transit vehicle are as follows:

1. Before entering the workshop, workers must wear all labor protection articles and protective equipment, otherwise they are not allowed to enter the production workshop.

2. Before using the intelligent transfer vehicle, it is necessary to check whether the exterior of the vehicle is in good condition and whether the transmission mechanism and its lubrication are normal. At the same time, it is also necessary to pay attention to removing the production wastes or obstacles placed on both sides of the track and in the middle, as well as the articles that may affect the normal use of the electric transfer vehicle. Before starting the work, it is necessary to send out the use signal to remind the surrounding people.

3. In the running process of track electric transfer cart, try to avoid emergency start and stop, so as to prevent danger and safety accidents due to the sliding of inertia load-bearing materials.

4. During the operation, two people should work at the same time, one should operate the electric transfer cart, the other should pay attention to the goods carried on the car and the surrounding conditions, and remind the past staff to pay attention to safety, inform the operator in time when finding the situation, and take corresponding measures to prevent injury to others or their own accidents.

conclusion

Henan Remarkable Intelligent Technology Co., Ltd.(RMK) is the professional manufacturer of material handling equipment,More than 15 years experience in material transfer carts production.Our main product lines are:Die Transfer Carts,Coil Transfer Carts,AGV-Automated Guided Vehicle,RGV-Rail Automatic Transfer Carts,Steel Transfer Carts, etc.We can customize a variety of load,function,table, application field transfer carts.

Related Articles