Battery Powered Transfer Cart is a kind of electric transport equipment widely used in factories, warehouses and logistics centers, which relies on the battery to provide power, and has the characteristics of flexibility, environmental protection, high efficiency and so on. Battery is the core component of battery transfer cart, and its performance directly affects the service life and operational efficiency of the equipment. Correct battery maintenance not only extends the battery life, but also ensures the stable operation of electric transfer carts and reduces the operating costs of enterprises.
I. Charging Management
Avoid overcharging and undercharging
Please use the original matching charger, and disconnect the power in time after full (most batteries stop automatically after full, but long-term plugging will affect the life).
It is recommended to charge the battery when the remaining 20%-30% of the battery power, to avoid complete depletion (deep discharge will shorten the battery life).
Control the charging temperature
Avoid charging at high temperature (>40℃) or low temperature (<0℃), extreme temperature will damage the chemical structure of the battery.
Choose a cool place for charging in summer, and charge in winter after the battery is warmed up (if the vehicle has a temperature control function).
Charging Frequency
Avoid frequent “charging with use”, it is recommended to charge the battery when the power drops to about 30%, to reduce the impact of the number of cycles on the life of the battery (lithium batteries can be recharged at any time). 4.
Use the original charger:
Different models of batteries need to match the charging parameters, poor quality chargers may lead to over-charging or under-charging, when the charger fails, it should be stopped immediately and replaced.
Control charging time:
The general charging time is 8-10 hours, avoid prolonged overcharging (more than 12 hours), and disconnect the power supply in time after the charging is completed.
II. The Battery Powered Transfer Cart use specification
Reasonable control of the load:
Do not exceed the rated load capacity of the motorized transfer cart, overloading will accelerate battery discharge, resulting in overheating of the battery, long-term overloading will permanently damage the battery.
Avoid deep discharge:
When the power indication is less than 20% should stop using, deep discharge will lead to the internal structure of the battery damage, equipment equipped with low battery alarm device should pay attention to the alarm prompts.
Smooth Operating Habits:
Reduce rapid acceleration, rapid braking or overloading, these behaviors will cause the battery to output a large current in a short period of time, accelerating the loss. It is recommended to operate the handle or controller smoothly, keep driving at a constant speed, and reduce the load appropriately for long uphill sections.
Reasonable planning of the length of use
continuous work, every 2-3 hours, it is recommended to let the battery rest for 10-15 minutes, to avoid sustained high temperature.
III. The Battery Powered Transfer Cart environment and storage requirements
Suitable working environment:
The best working temperature: 10 ℃ -30 ℃, avoid extreme temperatures (below -10 ℃ or higher than 45 ℃) under the use. Humid and dusty environment should strengthen the battery protection.
Correct storage method:
When not in use for a long time, the battery should be kept at 50%-70% charge for storage, and the storage environment should be dry, ventilated, and avoid direct sunlight.
Every 2-3 months for the storage of the battery for a supplemental charge.
Regular cleaning and inspection:
Keep the battery surface clean and dry.
Regularly check the battery connecting cables for looseness or corrosion.
Check the battery case for deformation or liquid leakage.
Battery maintenance checklist for Battery Powered Transfer Cart
| Maintenance Items | Frequency | Precautions |
|---|---|---|
| Routine Charging | Daily/after use | Avoid overcharging, use original charger |
| Surface Cleaning | Weekly | Wipe with a dry cloth, keep dry |
| Connection Checking | Monthly | Check terminals for looseness or corrosion |
| Capacity Checking | Before each use | Ensure sufficient power, avoid deep discharge |
Summary
The correct battery powered transfer cart battery maintenance not only prolongs battery life, but also ensures that your equipment operates efficiently and reduces failure rates. By following scientific charge management, standardized discharge use and appropriate environmental storage, you can maximize battery performance and improve the overall economic efficiency of battery transfer cart.
Remarkable provides all kinds of high-quality transfer cart and supporting battery products, if you have any technical questions about the battery maintenance of Battery Powered Transfer Cart, or need professional advice, please feel free to contact our technical team.
Related Articles
What Is a Transfer Cart
Die Transfer Cart And Mold Transfer Cart
