The 3-tonne lifting Carro de transferencia AGV manufactured by REMARKABLE is an intelligent transfer cart specifically developed for industrial automated logistics systems. It facilitates unmanned handling of medium-to-heavy loads between production workshops, warehouses, and workstations. This AGV integrates autonomous navigation, stable lifting, and multi-layered safety controls to achieve precise material handover with production lines and tooling equipment. It enhances internal logistics efficiency while reducing manual operation risks, serving as a vital component of modern smart manufacturing and flexible production lines.
REMARCABLE offers customization services covering load capacity, platform design, control modes, and functional modules to meet diverse operational requirements.
- Load Capacity: 3 Tons
- Dimensiones: 1800 × 1500 × 500 mm
- Lifting Stroke: Hydraulic lifting, 100 mm
- Fuente de alimentación: Lithium battery
- Speed: 0–25 m/min (stepless speed regulation)
- A medida: Producción personalizada disponible, incluidos componentes adicionales, etc.
Working Principle of the AGV Transfer Cart
The following explanation of the operating principles of the AGV transfer cart facilitates rapid comprehension of the core motion sequences and control logic for engineering and maintenance personnel.
Principio de funcionamiento:
- Task Triggering and Dispatch Command Issuance
The AGV transfer cart receives transport task instructions from the dispatch system, PLC, or higher-level control system, specifying target workstations, operational routes, and working modes, and enters a standby state for execution. - Automatic Positioning and Path Recognition
Real-time positional data is acquired via magnetic strips, QR codes, laser, or inertial navigation systems. The onboard controller parses and corrects the path, enabling stable operation along the predefined route. - Autonomous Traverse and Speed Regulation
The AGV robot executes autonomous movement according to the planned route, automatically adjusting speed at turns, intersections, or critical junctions to achieve smooth acceleration, operation, and deceleration. - Precise Workstation Positioning
Upon reaching the designated workstation, the equipment achieves accurate positioning via navigation signals or sensors. The system confirms the arrival status, preparing for subsequent lifting and docking operations. - Lifting Execution and Workstation Docking
Under control system directives, the hydraulic lifting mechanism activates, driving the load platform to vertically adjust its height. This aligns the material level with the production line or fixture platform, enabling safe and stable docking. - Status Feedback and Task Completion
Upon completing lifting and docking, the AGV automated guide vehicle updates its operational and task status to the host system. It then awaits further instructions or proceeds to the next transport task. - Safety Monitoring and Anomaly Handling
Throughout the operation, the AGV continuously monitors forward obstacles, operational status, and safety signals. Upon detecting anomalies, the system automatically decelerates, halts, or triggers alarms to safeguard personnel and equipment.
This workflow applies to both single-vehicle operation and multi-vehicle coordination within AGV transfer cart systems. Clients may customise configurations based on process requirements, facility environments, and automation levels.
AGV Transport Cart
The AGV Transfer Cart System
The 3-ton lifting capacity AGV transfer cart employs a modular design philosophy, featuring a stable overall structure and rational layout. It primarily comprises a load-bearing chassis, drive system, lifting system, control system, and safety protection system, enabling reliable operation under prolonged high-load working conditions.
Body Structure: Fabricated from high-strength steel welded components, the structure undergoes finite element analysis and optimised design to deliver exceptional load-bearing capacity and fatigue resistance, making it suitable for continuous heavy-duty operations.
Drive System: Equipped with industrial-grade drive motors and high-precision gearboxes, it operates smoothly with low noise levels. Supports precise start/stop control and speed regulation, enhancing AGV stability during cornering and docking manoeuvres.
Lifting System: The compact hydraulic lifting mechanism ensures excellent synchronisation, enabling smooth lifting and lowering under 3-tonne loads to accommodate varying workstation heights and process requirements.
Sistema de control: Utilises PLC and AGV-specific controllers, supporting automatic, semi-automatic, and manual operation modes. Facilitates on-site commissioning, maintenance, and system upgrades.
Safety Protection System: Integrates laser obstacle avoidance, collision sensors, emergency stop buttons, audible/visual alarms, and overload protection devices, comprehensively enhancing operational safety standards.
Carro de transferencia AGV
Technical Specifications Overview
Explore the technical specifications of this 3-tonne AGV transfer vehicle. Featuring 360-degree mobility and hydraulic lifting capabilities, it enables safe and precise operation.
| Parameter | Specification | Remarks |
|---|---|---|
| Model Type | AGV Trackless Electric Transfer Cart | Vehículo de guiado automático |
| Capacidad de carga | 3 Tons | Heavy-duty design |
| Overall Dimensions | 1800 × 1500 mm (L × W) | Personalizable |
| Platform Height | 500 mm | Roller conveyor surface |
| Ground Clearance | 50 mm | Suitable for indoor floors |
| Floor Requirement | Cement / Concrete Floor | Smooth and flat |
| Power Supply | Batería de litio | Maintenance-free |
| Control Method | Laser Navigation + Wired Remote Control | High positioning accuracy |
| Motor Power | 2 × 2 kW | Drive system |
| Travel Speed | 0–25 m/min (Variable Speed) | Adjustable |
| Braking System | Freno electromagnético | Safe and reliable |
| Material de la rueda | Polyurethane-Coated Wheels | Wear-resistant & low noise |
| Steering Type | Steering Wheel Drive | Flexible maneuvering |
| Travel Modes | Forward / Reverse / Turning While Moving / Diagonal / Lateral Movement | Multi-directional |
| Lifting Stroke | 100 mm | Optional lifting function |
| Charger Installation | Separate Type Charger | Easy maintenance |
| Charging Function | Fully Automatic Intelligent Charging | AGV docking support |
| Protección de la seguridad | Audible & Visual Alarm + Emergency Stop + Laser Obstacle Avoidance | Multiple safety layers |
| Additional Functions | Battery Level Display, Over-voltage, Under-voltage & Over-current Protection | System protection |
These are some of the specifications for our AGV transfer cart. Should you be interested in our intelligent AGV cart, please contact us, and we shall provide customised services tailored to your requirements.
Vídeos
Custom Parts for AGV Transfer Cart
Custom Series Parameters for AGV Trackless Electric Transfer Cart
| Technical Parameters Table Of RWP Trackless Electric Transfer Cart | |||||||||||
| Capacidad de carga nominal（t） | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | |
| Tamaño de la mesa (mm) | Longitud | 2400 | 2700 | 2700 | 3000 | 3500 | 4000 | 4500 | 5000 | 6000 | 6000 |
| Anchura | 1500 | 1800 | 1800 | 2000 | 2200 | 2000 | 2200 | 2500 | 3000 | 3000 | |
| Altura | 470 | 550 | 600 | 700 | 700 | 800 | 900 | 1000 | 1000 | 1000 | |
| Altura libre al suelo（mm） | ≥50 | ≥100 | |||||||||
| Radio de giro（mm） | 2200 | 2500 | 2500 | 2800 | 3300 | 6000 | 6800 | 7500 | 9000 | 9000 | |
| Modo de dirección | Dirección diferencial | Dirección hidráulica | |||||||||
| Método de funcionamiento | Remote Control & Hand-Operated Pendant | ||||||||||
| Muévete | Forward, backwards, turning while driving with no stop | Temperature: -10°c～40°c; Humidity: 20%～80%, No Condensation (Customised for high-temperature and explosion-proof environments) | |||||||||
| Velocidad de carrera（m/min） | 25 | 20 | |||||||||
| Tipo de motor | Low-voltage alternating current (AC) motor / brushless direct current (DC) motor | ||||||||||
| Modo Freno | Freno electromagnético | ||||||||||
| Medidas de protección | Luz de alarma acústica y visual+ Botón de parada de emergencia+Sensor láser de prevención de obstáculos(Opcional)+Borde de contacto anticolisión(Opcional) | ||||||||||
| Cantidad de ruedas | 4 | 6 | 8 | ||||||||
| Diámetro de la rueda motriz（mm） | Ф360 | Ф400 | Ф400 | Ф450 | Ф500 | Ф500 | Ф600 | Ф550 | Ф550 | ||
| Material de la rueda | Steel Core + Polyurethane | ||||||||||
| Capacidad de la batería（kW-h） | 5.5 | 8.5 | 10.5 | 14 | 18.5 | 18.5 | 30 | 37.8 | 45.3 | ||
| Tipo de batería | Batería de plomo-ácido | Batería de litio | |||||||||
| Resistencia de la batería | 5h(Customized As Needed) | 4h(Customized As Needed) | |||||||||
| Tiempo de carga de la batería | ≤7h | ≤5h | |||||||||
| Cargador de batería | AC220V/AC380V | ||||||||||
| Tipo de suelo | Cement Floor、Steel Plate Ground 、Epoxy Floor, Asphalt Floor | ||||||||||
| Capacidad de ascenso a plena carga | 5% | 3% | |||||||||
| Entorno de trabajo | Battery Power Display, Over Voltage, Under Voltage, Over Current Protection, etc | ||||||||||
| Color de la carrocería del vehículo | Personalizado | ||||||||||
| Otras funciones | Notas: 1) Other table sizes and load capacities can be customised according to user requirements. 2) For hydraulic steering, a dual hydraulic steering system can be selected to reduce the turning radius based on site space constraints. 3) Battery type and operating time (battery endurance) can be customized to meet customer needs. 4)The product is subject to continuous improvement and upgrades; specifications in the table may change without prior notice. | ||||||||||
| Notas: 1) Other table sizes and load capacities can be customised according to user requirements. 2) For hydraulic steering, a dual hydraulic steering system can be selected to reduce the turning radius based on site space constraints. 3) Battery type and operating time (battery endurance) can be customised to meet customer needs. 4)The product is subject to continuous improvement and upgrades; specifications in the table may change without prior notice. | |||||||||||
Características
Gran capacidad de carga
Rated load capacity of 3 tonnes, suitable for handling various heavy-duty materials.
Stable Lifting
Hydraulic platform ensures smooth and steady elevation for safe and reliable operation.
Protección de la seguridad
Laser obstacle avoidance, emergency stop and overload protection ensure operational safety.
Precise Positioning
Supports magnetic strip, laser and QR code navigation for accurate positioning.
Low-noise operation
Smooth and quiet drive system minimises operational noise and vibration.
Personalización flexible
Load capacity, dimensions, lifting height, and functional configurations can be tailored.
Aplicación
This 3-tonne lifting AGV transfer cart finds application not only in automated logistics warehousing but also across automotive manufacturing, aerospace, and other sectors. It significantly enhances safety and efficiency, meeting diverse requirements for flexible and reliable material handling.
Fabricación de automóviles: Used for the automated transfer of engines, moulds, and body components between workstations, achieving precise integration with production lines to boost assembly efficiency.
Metallurgy and Steel: Designed for high-load and high-dust environments, the AGV transfer cart safely handles steel structures, tooling, and heavy components, ensuring stable transportation.
Equipment Manufacturing: Enables continuous transfer of heavy components between welding, assembly, and inspection processes, optimising production cadence and enhancing overall workshop logistics efficiency.
Energy and Power: Suitable for internal workshop transport of heavy materials such as power generation equipment and electrical components. Ensures safe transportation of high-value equipment through stable lifting and precise navigation.
Aerospace: The 3-tonne lifting capacity AGV transfer cart enables smooth and precise handling of critical components, meeting intelligent logistics demands in high-standard production environments
Transfer Cart Case Showcase
AGV Transfer Cart Manufacturer
Henan REMARKABLE Intelligent Technology Co., Ltd. is a specialist manufacturer dedicated to the research, development, design, production, sales, and after-sales service of industrial transfer carts and AGV transfer carts. The company manufactures handling equipment and accessories across various tonnage capacities, while also providing professional R&D, design, and manufacturing services for customised carros eléctricos de transferencia, rail-guided trolleys, omnidirectional mobile transfer carts, trackless transfer carts, AGV robotsy remolques industriales.
The REMARKABLE possesses a comprehensive production system, stringent quality management, and extensive industry experience. Its products comply with the JB/T6127-2010 machinery industry standard, have passed the ISO three-system certification (quality, environment, and occupational health), and the CE certification. It has obtained 19 national product patents successively.
¿Por qué elegirnos?
- Conocimientos específicos del sector - Servimos a los sectores de generación de energía, construcción naval, construcción y aeroespacial con soluciones a medida para transformadores, componentes de aerogeneradores, módulos prefabricados y mucho más.
- Fully Customised - Desde la capacidad de carga (1-500+ toneladas) hasta los sistemas de propulsión (eléctrico, híbrido o diésel), satisfaga sus requisitos exactos.
- Sistemas de control avanzados - Las opciones incluyen control remoto manual, planificación semiautomática de rutas o navegación totalmente automatizada (integración de AGV).
- Calidad y durabilidad - Robustos bastidores de acero, módulos de dirección de alto par y certificación CE, ISO.
- Apoyo total al proyecto - Desde la consulta inicial hasta el servicio posventa, nuestros ingenieros ofrecen asistencia técnica de por vida.
Artículos relacionados
Soluciones inteligentes de manipulación de materiales personalizadas
Para garantizar que un carro de traslado personalizado se adapte perfectamente a sus necesidades, facilítenos los siguientes datos:
- Capacidad de carga: _____ toneladas (1~500 toneladas)
- Tamaño de la mesa: _____ × _____ mm/m (por ejemplo, 1500×3000)
- Opciones de alimentación:
- ☐ Plomo-ácido ☐ Ión-litio ☐ Otros: _____
- ☐ Cable: _____V/_____A
- Estándar 380 V/50 Hz/3 fases
- Detalles de la carga:
- Tipo: _____ (por ejemplo, bobinas de acero, maquinaria)
- Necesidades especiales: _____ (por ejemplo, antideslizante, resistente a la corrosión)
- Características opcionales:
- ☐ Parada de emergencia ☐ Sensores anticolisión
- ☐ Guías de carril ☐ Mecanismo de elevación ☐ Mando a distancia
